"Locator" Gage
|
DAVE JONES
MACHINISTS 1815 N. CEDAR ST., MISHAWAKA, IN 46545
PHONE/FAX: 574-256-5500 |
|
"Locator" Gage |
| YOU ARE HERE > HOME > PRODUCTS >LOCATOR |
SIGHT-PIPE® Locator Gage
| The SIGHT-PIPE® Locator Gage
combines the principles of a Depth Gage SIGHT-PIPEâ
SIGHT-PIPEâ and a radial location feature to give
inspectors a quick and easy way to visually check internal locations and sizes of
"cross holes", "channel holes" and other characteristics found on the
inside diameter of a bored hole. The gage shown is used to inspect a "rocker arm" (automotive engine component) to check the internal break out location and size of the oil holes. These holes are drilled at long, unusual angular positions subject to "drifting" or misalignment. |
|
| The Locator Gage locates on the piece part radially via a diamond locating pin inserted into another rocker arm bored hole. The operator then looks through the top of the gage to see that the position of the break out hole is within the reticle limits. |
|
| This particular application uses a square reticle to determine if the internal oil hole is within limits (inside the internal edges of all four lines) on it’s depth dimension, radial position and drilled hole size within the bore. |
|
This gage utilizes a hard coated aluminum housing to protect the SIGHT-PIPEâ and special lenses used to increase magnification. A full size fiber optic illuminator with adjustable intensity allows all inspectors using the gages to "dial in" their personal lighting preference.
These gages are custom designed and manufactured for each particular application. Contact us to find out about how a SIGHT-PIPEâ Locator Gage can help you and your company speed inspection and increase product quality.
YOU ARE HERE > HOME > PRODUCTS >LOCATOR
|
|
| THE SIGHT-PIPE® & SIGHT-PIPE® DESIGNS ARE COVERED UNDER U.S. PATENTS. |
| SIGHT-PIPE® & BOREVIEW™ ARE REGISTERED TRADEMARKS OF DAVE JONES MACHINISTS |
Copyright©1997-2003 Dave Jones Machinists-All Rights Reserved
