360 Degree SIGHT-PIPE®

Complete 360-degree view at right angles to the axis of the bore allowing for complete sidewall inspection with one pass.

360 Series SIGHT-PIPE®

360 Series SIGHT-PIPES® transmit an image showing a complete annular band of the sidewall being viewed. This makes it possible to view the complete 360° sidewall of a bore without rotating either the piece part or the SIGHT-PIPE®. 100% visual inspection is achieved by simply passing the SIGHT-PIPE® down the bore. Applications include inspection for porosity and random defects as well as internal annular grooves, recesses and threads, burrs, chips or contamination. The 360 Series SIGHT-PIPES® are available in standard diameters from 0.375″ to 1.000″ with special sizes available upon request. 360 Series SIGHT-PIPES® can be used alone or with the accessories described below. 

SIGHT-PIPE® Accessories:

– Stop Collar:                          Used to set the depth that the SIGHT-PIPE® can be inserted into the piece part. Useful when inspecting a characteristic at a specific depth.

– Light Input Adapter:             Fits on the head of the SIGHT-PIPE® and properly positions a light source to direct light down the SIGHT-PIPE® illuminating the area being viewed.

– 1310 Portable Illuminator:   Portable battery operated light source. (2 AA batteries)

360 Series | Fractional Sizes By Diameter | Effective January 1, 2024

Select the right SIGHT-PIPE® by choosing the NOMINAL DIAMETER that corresponds to the bore size you are inspecting. Then selecting the shortest length for the depth you need to inspect. Magnification numbers are approximate and may vary. Depending on condition, charge to repair or re-polish optical surfaces of worn SIGHT-PIPES® begins at $85. Custom sizes also are available. All Prices are shown in USD.

360 SIGHT-PIPE® Message

5 + 15 =