SIGHT-PIPES® for Visual Inspection

Borescopes fabricated from optical grade materials that allow for difficult to inspect characteristics to be viewed.

-Regular Series SIGHT-PIPE®

Regular series SIGHT-PIPES® are used to visually inspect a specific portion of a machined bore or cavity for a particular characteristic. The SIGHT-PIPE® projects an image, of the piece part sidewall, to the top of the enlarged head of the SIGHT-PIPE® at a right angle (90°). The image seen would be similar to that produced by sectioning (cutting) the piece part and looking directly at the sidewall. Regular series SIGHT-PIPES® are available in standard diameters from 0.125″ to 1.000″ with special sizes available upon request. SIGHT-PIPES® can be used alone or with the accessories described below. 

SIGHT-PIPE® Accessories:

– Stop Collar:                           Used to set the depth that the SIGHT-PIPE® can be inserted into the piece part. Useful when inspecting a characteristic at a specific depth.

– Light Input Adapter:               Fits on the head of the SIGHT-PIPE® and properly positions a light source to direct light down the SIGHT-PIPE® illuminating the area being viewed.

– 1310 Portable Illuminator:     Portable battery operated light source. (2 AA batteries)

Regular Series | Fractional Sizes By Diameter | Effective January 1, 2024

Select the right SIGHT-PIPE® by choosing the NOMINAL DIAMETER that corresponds to the bore size you are inspecting. Then selecting the shortest length for the depth you need to inspect. Magnification numbers are approximate and may vary. Depending on condition, charge to repair or re-polish optical surfaces of worn SIGHT-PIPES® begins at $85.00. Custom orders are available. All Prices are shown in USD.

Regular Series SIGHT-PIPE® Message

13 + 11 =